Analisis Oil Losses pada Serat Fiber di Stasiun Press PT. MNO dengan Metode Fishbone Diagram
Article Sidebar
Main Article Content
Abstract
Based on the results of initial observations at PKMS PT. MNO, it was found that there was oil loss in the fibers during the CPO processing process, especially at the press station. Therefore, research was carried out which aimed to analyze the factors that influence the high level of oil loss in fiber fibers at the press station of PT. MNOs. This research was carried out at PT. MNO located in Tanah Laut Regency, South Kalimantan. The research implementation period starts from 17 October 2022 to 25 January 2023. The data collection method in this research was carried out in 2 ways, namely interviews (direct observation) and literature study. The data was analyzed descriptively qualitatively by comparing the data found in the field with previous literature. The results of the analysis of oil loss at the press station in December 2022 showed that the average in week 1 (press 1) was 4.18, (press 3) 4.67, (press 4) 4.02. Week 2 (press 1) 4.41, (press 3) 4.36, (press 4) 3.97. Week 3 (press 1) 4.41, (press 3) 4.74, (press 4) 4.01 week 4 (press 1) 4.32, (press 3) 4.72, (press 4) 4 .17 which press number 3 in week 1, week 3 and week 4 does not meet company standards, namely 3.89%. From the results of the analysis that has been carried out, the appropriate treatment to prevent more severe oil loss is through routine maintenance of the press machine and the components that support the press station, repairs to the press machine by replacing worn tools, and The directive provides operators to always comply with applicable SOPs.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Bokau, R. J., & Basuki, T. P. (2018). Bungkil inti sawit sebagai media biokonversi produksi massal larva maggot dan uji respon pemberian pada ikan Nila (Oreochromis niloticus). In Prosiding Seminar Nasional Pengembangan Teknologi Pertanian.
DARMAWAN, A. (2013). ANALISIS PENGARUH TANDAN BUAH SEGAR (TBS) DAN KERUSAKAN MESIN TERHADAP PRODUKSI KERNEL (STUDI KASUS: PMKS TALIKUMAIN ROHUL) (Doctoral dissertation, Universitas Islam Negeri Sultan Syarif Kasim Riau).
Desniorita, D., & Eliza, E. (2019). Analisis Oil Losses Pada Stasiun Press Dalam Pengolahan Cpo (Crude Palm Oil) Dengan Metode Statistical Process Control (Spc) Di Pt Perkebunan Nusantara Iii Pks Rambutan Tebing Tinggi Sumatera Utara. SAINTI: Majalah Ilmiah Teknologi Industri, 16(2), 106-115.
Fauzi, Y., Widyastuti, Y. E., Satyawibawa, I., & Paeru, R. H. (2012). Kelapa sawit. Penebar Swadaya Grup.
Halim, A., Suryapradana, I., Agung, P., & Solikhin, M. (2023, December). RANCANG BANGUN MESIN PRESS LIMBAH OIL DAN FUEL FILTER (B3) DENGAN SISTEM PNEUMATIK. In Prosiding Seminar Nasional Teknologi Industri (SNTI) (Vol. 10, No. 1, pp. 357-362).
Harahap, M. M. Analisis Penerapan ISO 45001-2018 Pada Risiko Kesehatan dan Keselamatan Kerja Karyawan di Area Produksi CPO PT (Bachelor's thesis, Fakultas Sains dan Teknologi UIN Syarif Hidayatullah Jakarta).
Hikmawan, O., Rachmiadji, I., & Ramadhany, R. (2021). Penentuan Kinerja Mesin Digester Pabrik Kelapa Sawit Kapasitas 10 Ton Tbs/jam di Unit Sterilizer Pabrik Kelapa Sawit. Indonesian Journal of Industrial Research, 16(31), 43-50.
Kuswoyo, A., & Ulimaz, A. (2022). Pengaruh Jenis dan Ketebalan Karbon Aktif pada Sistem Constructed Wetlands untuk Pengolahan Limbah Cair Rumah Tangga. Bioscientist: Jurnal Ilmiah Biologi, 10(1), 173-181.
Purba, W., & Ardiyanti, D. (2021). Dinamika Kerjasama Perdagangan Indonesia dalam Ekspor Kelapa Sawit ke India Tahun 2014-2019. Jurnal Mahasiswa Fakultas Ilmu Sosial dan Kependidikan, 2(1), 133-140.
Putri, D., Darus, H. M. B., & Sihombing, L. (2013). Analisis Kelayakan Finansial Kelapa Sawit Rakyat (Studi Kasus: Kecamatan Bagan Sinembah Kabupaten Rokan Hilir Provinsi Riau). Journal of Agriculture and Agribusiness Socioeconomics, 2(8), 15109.
Saediman, H., Gafaruddin, A. B. D. U. L., Hidrawati, H. I. D. R. A. W. A. T. I., Salam, I., Ulimaz, A., Rianse, I. S., ... & Taridala, S. A. A. (2021). The contribution of home food gardening program to household food security in Indonesia: A review. WSEAS Transactions on Environment and Development, 17(1), 795-809.
Statistik, B. P. (2020). Analisis Isu Terkini 2020.
Suwandy, R. (2019). Analisa Perawatan Mesin Digester dengan Metode Reliability.
Thahira, A. (2023). Peningkatan Berkelanjutan: Pendekatan Analisis Tulang Ikan. ASSET: Jurnal Manajemen dan Bisnis, 6(1).
Tyas, V. A. (2023). PENGENDALIAN KUALITAS OIL LOSESS PADA FIBER DARI HASIL PENGEPRESAN (SCREW PRESS) DENGAN MENGGUNAKAN METODE EKSTRAKSI SOKLET DI PT. INTI GUNA NABATI (Doctoral dissertation, Universitas Katolik Musi Charitas).
Ulfah, K. U., Al Hakim, L. A. H., Dimas Ilham, M. D. I., Muliyanto, M. M., Sri Julianti, N. S. J., Arianti, N. A., ... & Suryani, R. S. (2018). Nilai Ekonomi Tanaman Kelapa Sawit (Elaeis guinensis jack) Untuk Rakyat Indonesia.
Ulfah, M., & Ferdinant, P. F. (2021). Usulan perawatan mesin presss h-draw pada divisi stamping press dengan metode reliability centered maintenance dan reliability centered spares (studi kasus: PT. TMMI). Journal Industrial Servicess, 7(1), 106-111.
Ulimaz, A. (2022). Analisis Keselamatan dan Kesehatan Kerja pada Stasiun Loading Ramp dengan Metode HIRARC di PT. XYZ. INSOLOGI: Jurnal Sains dan Teknologi, 1(3), 268-279.
Ulimaz, A., Kuswoyo, A., & Nurisyah, N. (2021). PEMBUATAN ALAT PENGOLAH PRODUK BERBASIS PISANG. Batuah: Jurnal Pengabdian kepada Masyarakat, 1(1), 16-20.
Ulimaz, A., Nuryati, N., Ningsih, Y., & Hidayah, S. N. (2021). Analisis Oil Losses pada Proses Pengolahan Minyak Inti Kelapa Sawit di PT. XYZ dengan Metode Seven Tools. Jurnal Teknologi Agro-Industri, 8(2), 124-134.
Wardianto, D. (2022). Failure Analysis of the Screw Press Machine. Jurnal Teknik Mesin, 12(1), 72-81.
Yardani, J., Akbar, J., & Ulimaz, A. (2023). Analisis Tingkat Kecelakaan Kerja di Pabrik Kelapa Sawit PT. ABC menggunakan Job Safety Analysis. Jurnal Teknologi Agro-Industri, 10(1).
Yudaningtyas, I. E. Sistem Kontrol Produk Gas Metana Pada Digester Tipe Fixed Dome (Doctoral dissertation, Brawijaya University).